MM1-BLACK · Firmware
Update your instrument
Install the latest release over Wi-Fi or use a
USB UART connection. USB installation requires
Chrome or Edge on a computer.
USB installation requires Google Chrome or
Microsoft Edge on a computer. Wi-Fi installation
remains available.
Installation method
- 01 On MM1-BLACK, open SETUP → WiFi
- 02 Connect the computer to the same network
- 03 Find the instrument or enter its address
- 04 Confirm and install
- 01 Connect the USB UART adapter
- 02 Close the serial monitor and IDE
- 03 Select the board and release
- 04 Use BOOT → RST when requested
Board model
In AP mode, use 192.168.4.1. After joining a
network, find the address under SETUP → WiFi.
Installed release
—
Technical details